Terminal Server ETS Family
- ET8PS
- ETS16PS
- ETS16PR
- ETS32PR

Advanced Security SecureBox®
- SDS1101
- SDS1100
- SDS2100

Commercial
- EDS8/16/32
- EDS4100
- UBox®
- UDS1100
- UDS2100
- UDS-10 NEW
- UDS10/ 100-IAP
- UDS200
- MSS100
- MSS4
- MSS485-T
- CoBox-FL

Industrial
- IntelliBox®-I/O NEW
- UDS1100-IAP
- UDS-10-IAP
- UDS100-IAP
- XPress-I/O NEW
- XPress-DR+™
- XPress-DR+ Wireless
- XPress-DR™
- XPress-DR-IAP
- CoBox-FL-IAP

Industrial Device Servers

XPress-I/O

Highlights

* Remotely monitor and control RS232 or RS422/485-based equipment
* Secure access and control of remote digital I/O and relays
* Datacenter-grade security with included SSH/SSL
* RoHS logoRemote I/O management using common SCADA or OPC servers with Modbus/TCP protocol
* 10/100 Ethernet interface with 1.5kv isolation (802.3 standard)
* Two serial ports, 1 RS232, 1 RS422/485, with ESD protection
* Removable screw terminal blocks for all connectors and power input
* Two optically-isolated digital I/Os (IO1-, IO1+, IO2-, IO2+)
* Modbus TCP to Modbus RTU/ASCII gateway
Remotely Monitor and Control Your Industrial Equipment
– Quickly and Easily!

The rugged XPress-I/O device server delivers a powerful I/O network connectivity option for a wide range of industrial automation equipment.

Combined with Lantronix’s serial device networking power, digital I/O and dry contact (relay) functionality delivers the ability to remotely access, monitor and control industrial I/O devices with maximum flexibility. Xpress I/O can monitor and control alarms, valves, fans, lights, motor starters, control relays and much more.

Featuring Lantronix Evolution OS™, our powerful real-time Networking Operating System, the XPress-I/O delivers an unprecedented level of intelligence and security to networked equipment, complete with SSH and SSL security built-in. With this powerful product, just about any piece of equipment with a serial port can become a fully secure member of the corporate network so it can be accessed and managed remotely from virtually anywhere.
Applying Network Connectivity to I/O Devices

With the XPress-I/O device server, monitoring and protection of your high-value I/O assets has never been so easy. Through remote I/O management using common SCADA, OPC Servers or PLC’s with Modbus/TCP protocol, this specialized device server enables users to monitor equipment failure, environmental alarms, intrusion detection, relay contact closures – a wide array of industrial equipment with I/O functionality.

The addition of digital I/O and relay monitoring enables the XPress-I/O to not only protect data but also the physical environment that provides it. Activity can be monitored remotely and the user alerted via email or Modbus TCP. Enabling the user to respond to critical events, digital I/Os and relays can be triggered remotely from the XPress-I/O’s web page, command line interface or via Modbus.
Standards Based Communications

The XPress-I/O’s open Ethernet architecture lets you quickly and easily incorporate your industrial I/O equipment into existing network system designs.

When used in conjunction with an OPC server, most Windows®-based HMI, SCADA and PC-based control applications have full access to information in connected devices. Existing COM-port based applications can access network-enabled devices via Lantronix’s Com Port Redirector™ software. And with our powerful Evolution OS™ operating system, you’ll have the flexibility to accommodate future network expansion.
Thrives in the Industrial Environment

The XPress-I/O meets the demanding, complex industrial environment head on. It’s equipped with isolated serial, I/O and Ethernet ports. Screw terminal connectors are provided for serial, I/O, relay and power. It supports industrial protocols such as Modbus TCP, Modbus ASCII, Modbus RTU and is FM-approved for hazardous locations Class 1, Div. 2.

* 15KV serial ESD protection and 2.5KV Ethernet
isolation protects circuitry from overcurrent conditions
* ESD-protected I/O channels are independent and optically isolated
* Wide -40°-75°C operational temperature range
* Flexible power with 9-30 VDC and 9-24 VAC input range

Configuration Flexibility

Flexible configuration options allow the XPress-I/O to be set up locally using the serial port, or remotely over Ethernet using Telnet or browser. The CPU’s flash memory provides maintenance-free, non-volatile storage and easily accommodates future system upgrades.

Features / Specifications
Serial Interface

* 2 Serial ports: 1 RS232, 1 RS422/485 (4-wire/2-wire) with terminal block connection
* Baud rate selectable from 300 to 230 Kbps
* Customizable baud rate support for non-standard serial speeds
* LED indicators for TXD and RXD activities

Serial Line Formats
Characters 7 or 8 data bits
Stop Bits 1 or 2
Parity odd, even, none
Flow Control
Hardware RTS/CTS
Software XON/XOFF
Modem Control

* CTS, RTS, DTR, DCD on Serial 1

Digital I/O

* 2 Independently configurable digital I/Os, configured via GUI set-up Menu
* Opto-isolated to eliminate grounding issues
* Logically compatible with 3.3V level,and also higher voltage levels
* Opto-isolated relay if configured as outputs, thus, can also be used as low power DC/AC switches
* Transient voltage and polarity reversal protections built in

Relay

* Contacts are capable of handling up to 8A resistive load
* Contacts are mechanically isolated to eliminate grounding issues
* Contacts are non-latching with Normally Open (NO) or Normally
* Closed (NC) for simple application such as power failure indication

Network Interface

* 1 RJ45 Ethernet port
* 10Base-T/100Base-TX
* Full or half duplex
* Auto-negotiating or hard coded

LED Indicators

* 10Base-T and 100Base-TX Link
* Ethernet Activity
* Serial Transmit Data
* Serial Receive Data
* Power / Status

Management

* Internal web server
* SNMP v2C (MIB-II, RS232MIB)
* Serial login
* Telnet/SSH login
* XML
* DeviceInstaller software

Power Input

* Removable screw terminal block connector
* 9-30 VDC or 9-24 VAC with chassis ground
* 2.3W

Environmental
Temperature -40°C to 75°C (-40° to 167°F) Operating
-40°C to 85°C (-40° to 185°F) Storage
Humidity 10% to 90% relative humidity, noncondensing
Agency Approvals

* UL, CSA, FCC, CE, TUV, CTick, VCCI, FM Class 1, Div. 2

Protocols Supported

* ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, Auto IP, SMTP, FTP, DNS, Traceroute, HTTP

Industrial Application Protocols

* Modbus TCP, Modbus ASCII/RTU

CPU

* Lantronix DSTNI-EX 120 MHz clock, 256 KB SRAM, 16 KB Boot ROM Internal CPU Memory

Flash Memory

* 4 MB Flash
* 2 MB SRAM

EEPROM

* 64 Kbits

Reset

* Recessed push button

Packaging
Case metal enclosure with wall mounts
- IP30 enclosure rating
Dimensions (L x W x H) 115 x 109 x 23 mm (4.54 x 4.30 x .90 in), terminal blocks included
Weight 0.3 kg (0.63 lb) (10 oz)
Shipping Dimensions (L x W x H)

* 254 x 216 x 70 mm (10 x 8.5 x 2.75 in.)

Isolation

* 8 KV direct contact, 15KV air discharge, ESD protection on all Serial ports (IEC 1000-4-2, IEC 61000-4-2)
* 2 K VAC / 2.8K VDC galvanic isolation between Power Input port to Ethernet ports (except Chassis ground)
* 2 K VAC / 2.8K VDC galvanic isolation between Power Input port to Serial ports
* Transient Voltage protection and ESD with max non-repetitive surge current 800 Amp (8/20 μs) (IEC 61000-4-2)
* 2 K VA / 2.8K VDC galvanic isolation between Ethernet ports (except chassis ground)
* 2 K VA / 2.8K VDC galvanic isolation between Ethernet ports to Serial ports
* 40 A (5/50 ns) EFT protection (IEC 61000-4-4), 12 A (8/20 μs) lightning protection (IEC 61000-4-5) on all Ethernet ports
 

Or Call: 1.800.663.1141 now and speak to one of our sales associates.