Terminal Server ETS Family
- ET8PS
- ETS16PS
- ETS16PR
- ETS32PR

Advanced Security SecureBox®
- SDS1101
- SDS1100
- SDS2100

Commercial
- EDS8/16/32
- EDS4100
- UBox®
- UDS1100
- UDS2100
- UDS-10 NEW
- UDS10/ 100-IAP
- UDS200
- MSS100
- MSS4
- MSS485-T
- CoBox-FL

Industrial
- IntelliBox®-I/O NEW
- UDS1100-IAP
- UDS-10-IAP
- UDS100-IAP
- XPress-I/O NEW
- XPress-DR+™
- XPress-DR+ Wireless
- XPress-DR™
- XPress-DR-IAP
- CoBox-FL-IAP

External Device Servers

UDS200

Highlights

• Remotely monitor, manage and control serial devices over Ethernet
• Replace limited-distance point-to-point serial connections
• Two RS-232 serial ports pinned the same as a standard PC
• Configurable with included Windows® software or via built-in web server
• Compact size enables it to fit almost anywhere

Remotely Monitor, Manage and Share Devices
Over a Network or the Internet

The dual-port UDS200 device server enables you to connect serial devices to IP-based Ethernet networks, quickly and easily. Powered by DSTni-LX, a powerful Lantronix device networking chip, the UDS200 replaces limited distance, point-to-point serial connections.

Our approach to network-enabling devices is transparent to your attached devices and software. You won’t need to change the way you work, and there’s no need to develop special software to take advantage of Ethernet networking. And with the UDS200 any piece of equipment with a serial port can be added to the network in a matter of minutes!

Using a method called serial tunneling, the UDS200 encapsulates serial data into packets and transports it over Ethernet. Using two UDS200s, connected by a network, virtual serial connections can be extended across a facility or around the world. So you can manage your equipment from virtually anywhere over a network or the Internet.

The included redirection software extends the functionality of your COM port-based Windows® applications. With virtual COM ports, mapped to remote device servers on the network, you can replace direct serial connections.
Easy to Set Up and Use

The included Windows-based configuration software simplifies installation and setup. The UDS200 can also be set up locally through its serial port, or remotely over a network using Telnet or a web browser.

The UDS200 includes a built-in web server, which can be used for configuration and to host usercreated web pages for accessing and controlling the connected equipment.

Flash memory provides maintenance-free nonvolatile storage of web pages, and allows future system software upgrades.
Modem Replacement

In modem emulation mode, the UDS200 is used to replace dial-up modems. The unit accepts modem AT commands on the serial port, then establishes a network connection to the end device, leveraging network connections and bandwidth to eliminate dedicated modems and phone lines.

If you’re looking for a transparent, cost-effective, and scalable means to network-enable your serial devices, look no further than the UDS200.

back to toptop of page
Features / Specifications
Serial Interface
Interface RS-232
Connectors 2 DB9 (male, DTE configuration)
Data Rates 300 to 115,200 bps
Characters 7 or 8 data bits
Parity odd, even, none
Stop Bits 1 or 2
Control Signals RTS, CTS, DSR, DTR, DCD
Flow Control XON/XOFF, RTS/CTS
Network Interface
Interface Ethernet 10Base-T/100Base-TX
Connector RJ45
Standards ARP, UDP/IP, TCP/IP, ICMP, SNMP, AutoIP, DHCP, TFTP, Telnet and HTTP
Indicators (LED)

* Power, 10 Link/activity (green)
* 100 Link/activity(green)
* Diagnostics (red)
* Status channel 1 (green)
* Status channel 2 (red)

Processor
CPU DSTni-LX (enhanced 80186, 48 MHz)
Memory 256 Kbytes SRAM, 1MB flash
Management
Lantronix DeviceInstaller™ GUI, Serial login, SNMP, Telnet login, HTTP
Internal Web Server
Provides static web pages
Storage capacity 896 KBytes
Power
Input 9 to 30 VDC,
9 to 24 VAC
Consumption 2 W maximum
AC adapter included (see Ordering Information below)
Environmental
Operating 5° to 50°C (41° to 122°F)
Storage -40° to 66°C (-40° to 151°F)
Packaging
Material Metal case with flange mount
Dimensions 23 x 72 x 95 mm
(0.9 x 2.8 x 3.7 in)
Weight 0.4 kg (0.9 lbs)
Agency Approvals
FCC-B, C/UL, CSA, CE,TUV
Shipping Dimensions
Dimensions 115 x 242 x 191 mm
(4.5 x 9.5 x 7.5 in)
Weight 1.5 kg (3.0 lbs)
Included Software
Windows® 98/ME/NT/2000/XP-based configuration software, Com Port Redirector™ software, and related utilities.
 

Or Call: 1.800.663.1141 now and speak to one of our sales associates.