External Device
Servers Wireless
- WiBox®
- WiSpanTerminal Server
ETS Family
- ET8PS
- ETS16PS
- ETS16PR
- ETS32PR
Advanced Security SecureBox®
- SDS1101
- SDS1100
- SDS2100
Commercial
- EDS8/16/32
- EDS4100
- UBox®
- UDS1100
- UDS2100
- UDS-10 NEW
- UDS10/ 100-IAP
- UDS200
- MSS100
- MSS4
- MSS485-T
- CoBox-FL
Industrial
- IntelliBox®-I/O NEW
- UDS1100-IAP
- UDS-10-IAP
- UDS100-IAP
- XPress-I/O NEW
- XPress-DR+™
- XPress-DR+ Wireless
- XPress-DR™
- XPress-DR-IAP
- CoBox-FL-IAP |
SecureBox®
SDS1101
Single-Port Secure Device
Server
Highlights
* Securely network-enable serial devices with 128-256 bit AES-certified
encryption
* RoHSTransparent communications - no need to develop special software
* RS-232 DCE serial port pinned the same as modem for easy connection
* 10/100 Ethernet Interface
* Supported by Lantronix's Secure Com Port Redirector™ software
Features /
Specifications
Serial Interface
Interface Software-selectable RS232, RS422 or RS485 (2 and 4 wire
support)
Connectors 1 DB25F DCE serial port
Data Rates Software-selectable baud rate from 300 to 230 KBaud
Characters 7 or 8 data bits
Parity odd, even, none
Stop Bits 1 or 2
Control Signals CTS/RTS (Hardware)
Flow Control XON/XOFF (Software)
Network Interface
Interface 10Base-T/100Base-TX Ethernet port
* Software selectable Ethernet speed 10/100/Auto
* Software selectable Half/Full/Auto duplex
Connectors RJ45
Standards ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP
TCP, UDP, and Telnet, TFTP
Indicators (LED)
* Power, 10/100 Link/Activity (green),
* 100/100 Link/Activity(green),
* Diagnostics (red),
* Status (green)
Processor
CPU DSTNI-EX 48 MHz clock
Memory 256 KB zero wait state SRAM, 2 MB Flash
Management
* Lantronix DeviceInstaller GUI, Serial login, SNMP, Telnet login, HTTP
Power
* 9-30 VDC or 9-24 VAC on barrel connector (1.5 Watts maximum
consumption)
* 9-30 VDC on DB25F serial interface
Environmental
Operating 5° to 50° C (41° to 122° F)
Storage -40° to 66° C (-40 to 151° F)
Packaging
Material Metal enclosure with integrated wall mounts; optional 35 mm
DIN-rail mount available
Dimensions (LxWxH) 9.0 x 6.4 x 2.3 cm (3.5 x 2.5 x 0.9 in)
Weight 0.20 kg (0.45 lb)
IP Rating 30
Agency Approvals
* UL, CSA, FCC, CE, TUV, CTick, VCCI
Shipping Dimensions
Dimensions (LxWxH) 242 x 191 x 115 mm (9.5 x 7.5 x 4.5 in)
Weight 1.5 kg (3.0 lbs)
Included Software
* Windows® 98/ME/NT/2000/XP-based DeviceInstaller configuration
software, Com Port Redirector™ software and related utilities
Emissions
FCC Part 15 Subpart B Class A Radiated Emissions 30MHz – 1000MHz
ICES-003 Issue 4 February 2004 Class A Radiated Emissions 30MHz –
1000MHz
AS/NZS CISPR 22: 2004 Class A Radiated Emissions 30MHz – 1000MHz
EN55022: 1998 + A1: 2000 + A2: 2003 Class A Radiated Emissions 30MHz –
1000MHz
VCCI V-3/2005.04 Class A Radiated Emissions 30MHz – 1000MHz
EN61000-3-2: 2000 Class A Harmonic Current Emissions
EN61000-3-3: 1995 + A1: 2001 Fluctuations and Flicker
Immunity
EN55024: 1998 +A1: 2001 +A2: 2003
IEC_61000-4-2: 1995 ESD 8KV Air Discharge (Direct), 4KV Contact
Discharge (Direct/Indirect)
IEC_61000-4-3: 1995 Radiated Immunity 3.0V/m, 1KHz AM Sine Wave at 80%
IEC_61000-4-4: 1995 EFT/Burst 1.0KV Power Lines, 0.5KV I/O Lines
IEC_61000-4-5: 1995 Surge Immunity 1.0KV Common Mode, 1.0 KV
Differential Mode
IEC_61000-4-6: 1996 Conducted Immunity 3.0 Vrms, 80% AM Modulated (1KHz)
IEC_61000-4-8: 1993 Magnetic Field Immunity 50Hz 1.0 Arms/m
IEC_61000-4-11: 1994 Voltage Dips and Interrupts (>95%,0.5 periods),
(30%,25 periods), (>95%,250 periods)
Isolation
* Designed with protection against transients and ESD for use under
harsh environments.
Serial Port 15 KV ESD protection on RS232 and RS422/485 transceivers
Power Input Up to non-repeated 600 W 10/100 usec pulse protection
against transient over voltages
Ethernet Port 1500 VAC isolation shielded with shield connected to
chassis ground for signal integrity and ESD protection
| If you would
like further information, please submit this form or contact us at
sales@nationaldatamux.com and we will get right back to you!
|
 |
Or
Call: 1.800.663.1141 now and speak to one of our sales
associates. |
|